1
 |
2
 |
3
 |
4
 |
5
 |
6
 |
7
 |
8
 |
9
 |
10
 |
11
 |
12
 |
13
1. The old mangled antenna.
2. Antenna is bent and end is missing.
3. Hole is too big for replacement antenna and has some filler built up on the inside of one side of the hole. So it is not flush on the underside.
4. Other side of hole doesn't have the build up of filler and is flush.
5. Appears that half the antenna housing is missing and former owner was a crack head with a welder.
6. compares where antenna brackets are on both antennas
7. hold down for replacement antenna won't fit through the OE Insert. Without insert the Antenna motor tube has nothing to compress against (see picture 13)
8. The old bracket and where it currently is mounted.
9. Just for another veiw
10. The bracket plus two empty holes?
11. Another veiw
12 better picture of upper bracket
13. Replacement antenna goes up through the whole with nothing to press against.