|
Part |
Brand |
Nomenclature |
Part Number |
Dimension |
Special Description |
| Engine Block |
Chevrolet |
OE Replacement |
|
.030 over |
Pulte honed and decked |
| Heads |
Shortturn Perfit |
|
PFS190202-1A |
Assembled Small Block Chevy 23 Degree Aluminum Cylinder Heads |
• Manganese Bronze intake guides
•Phosphor Bronze Exhaust Guides
•.200 Raised Intake Ports
•190cc Intake runners
•64cc Combustion Chambers for 9.5 to 1 compression w/flat top piston
•No-Lead Compatible Valve Seats
•Straight Plug
•Engine Pro 7 Degree Machined Valve Locks
•Engine Pro 7 Degree Steel Retainers
•Engine Pro 2.020 + .100 Long One Piece Stainless Steel Swirl Polished
Intake Valves
•Engine Pro 1.600 + .100 Long One Piece Stainless Steel Swirl Polished
Exhaust Valves
• Engine Pro 1.250 Single Valve Springs 115lbs. @ 1.800 Seat / 320lbs. @
1.30 Open
• Engine Pro Viton Valve Seals
• Engine Pro 5/16 Flat Guide Plates
• ARP 3/8 Rocker Arm Studs
(for Cams up to .500 Lift - Flat Tappet Hydraulic & Mechanical Plus
Hydraulic Roller) |
| Harmonic Balancer |
Engine Pro |
400 SBC |
DH-400 |
Already Replaced with a new one. |
|
| Crank |
Scat |
9000 Series Cast Steel |
|
383 |
|
| Pistons |
Seal Power Speed Pro |
Flat Top with Single Valve Relief |
|
.030 over |
|
| Chevy 262-400 Magnum Retro-Fit 270HR Cam PART #12-420-8 |
Comp Cam |
HYDRAULIC ROLLER: Mild street performance, slightly noticeable lope at
idle. Stock converter, aftermarket intake and headers. 3.40 to 4.10 rear
gears. |
12-420-8 |
|
http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=150&sb=2 |
| SB Chevy 265-400 V8 High Energy Retrofit Hydraulic Roller Lifters PART
#853-16 |
Comp Cam |
High Energy™ Hydraulic Roller Lifters Chevrolet Small block 265-400. A
retro-fit lifter for early model blocks equipped with a standard
hydraulic cam. These lifters are for use with the newly designed
hydraulic roller cam series from COMP Cams® or as a performance
replacement for stock hydraulic roller lifters. You must be certain that
the lifter is correct for the type of block used. |
853-16 |
|
http://www.compperformancegroupstores.com/ |
| 5/16 MAGNUM PUSHROD 7.750 PART #7644-16 |
Comp Cam |
MAGNUM PUSHRODS COMP Cams®' Magnum Pushrods™ are the perfect complement
to your Hot Street, Bracket, Oval Track, or any other high performance
engine. Magnum Pushrods™ are one-piece .080” wall chrome-moly steel.
These pushrods are an affordable alternative for engines needing a
pushrod to stand up to higher spring pressures and the associated
stresses of a high performance engine. All Magnum Pushrods™ are Heat
Treated to be compatible with guide plates.Length 7.750 |
7644-16 |
7750 |
http://www.compperformancegroupstores.com/ |
| Part |
Brand |
Nomenclature |
Part Number |
Dimension |
Special Description |
| Roller Rockers |
Crane |
Crane Gold 1.5 |
WG3060 |
|
|
| Intake |
Professional Products 52000 - Professional Products
Cyclone Intake Manifolds |
Engine Block Style - Stock / OEM standard deck Carburetor Quantity -
Single Intake Style Dual plane Basic Operating RPM Range - Idle-5,500
Intake Manifold Height - 4.050 in. Intake Finish - Polished Intake
Material - Aluminum |
PFS-52000 |
Brand Professional Products
Manufacturer's Part Number 52000
Part Type Intake Manifolds, Carbureted
Product Line Professional Products Cyclone Intake Manifolds
Summit Racing Part Number PFS-52000
UPC 665053520006
Engine Block Style Stock/OEM standard deck
Carburetor Quantity One
Intake Style Dual plane
Basic Operating RPM Range Idle-5,500
Intake Manifold Height 4.050 in.
Intake Finish Polished
Intake Material Aluminum
EGR No
Quantity Sold individually.
Notes Includes bushings for 1987-95 iron heads.
Calculator CFM Calculator |
| Engine Block StyleStock/OEM standard deckCarburetor
QuantitySingleIntake StyleDual planeBasic Operating RPM
RangeIdle-5,500Intake Manifold Height4.050 in.Intake
FinishPolishedIntake MaterialAluminum |
|
| Carburetor |
HOLLEY |
600 CFM Four Barrel Street Carburetor |
PART # 80457-S |
|
Vacuum secondaries allow use on wide variety of vehicles
Electric choke for easy warm up
Single feed fuel inlet
Calibrated for excellent street performance
Ford A/T kickdown, does not work with A.O.D. transmissions
1 timed (spark) port, 1 full vacuum, and 1 PCV port
Performance upgrade for stock to mildly modified vehicles. Universal
calibration for easy bolt-on performance
“Next Gen” needle & seat design eliminates the need for external
float level adjustment
|
| Spark Plug |
AC/Delco |
|
41-629 |
0.035 |
DISSAPPOINTED MADE IN MEXICO |
| Carburetor Replaced this one with a carb from a Local Holley Carb
rebuilder. |
HOLLEY |
4160 750 CFM Four Barrel Street Carburetor |
PART #: 0-80508S |
|
Vacuum secondary's allow use on wide variety of vehicles
Electric choke for easy warm up
Dual feed fuel inlet
1 timed (spark) port, 1 full vacuum, and 1 PCV port
Performance upgrade for stock to mildly modified vehicles
Universal calibration for easy bolt-on performance |
